KitchenAid Mixer Bowl Lock Plate
This original KitchenAid Mixer Bowl Lock Plate will fit ALL 4.5 quart and 5 quart Artisan stand mixers (head-tilt designs). It sits on top of the mixer base and holds the mixing bowl firmly in place. This part is often referred to as the KitchenAid Stand Mixer Bowl Cap Screw, and is referenced under the part number 4163032 and W10191926.
The mounting hardware is not included. This part WPW10191926 replaces obsolete part #:W10191926 and 4162529.
Please Note: Installation of the lock plate may be difficult depending on your mixer. You may need to use a rubber mallet to tap it into place. DO NOT USE a metal faced hammer or you will damage the lock plate and it is NON-RETURNABLE after being damaged. A few light to medium taps may be required to properly install the lock plate. If you are unable to install this part we recommend that you have this repair done by a KitchenAid Service Center.
Fits models that begin with: 3K45, 3K5, 4K45, 4K5, 4KPD16, 4KSM150, 4KSM50, 4KSM90, 5K45, 5K5, 5KPM50, 5KSM150, 5KSM156, 5KSM45, 5KSM5, 7K45, 7K5, 8KSM90, 9KSM150, 9KSM90, BEA30, K45, K4, K5, KSM5, KSM90, KP5, KPM5, KSM100, KSM103, KSM111, KSM120, KSM150, KSM151, KSM155, KSM158, KSM160, KSM45, KSM5, KSM75, KSM90, KSM95, KSMC50.