Trigger Valve Kit
Trigger Valve Assembly (not Th A08368
Part Number: A08368
Porter Cable
Product Information
Manufacturer: Porter Cable
Product Number: A08368
Classification: Part
Weight: 0.03 lbs.
Description:
This unthreaded trigger valve assembly is a genuine OEM assembly used in nailers. It includes the trigger valve, 1 rubber washer, and 3 roll pins. The trigger valve controls the flow of air in the tool which drives the piston and creates the nailing action. If the valve becomes stuck, the seals wear down, or the trigger breaks the nailer will leak air, struggle to fire, or not fire at all. Begin the repair by switching off the tool and using a push pin to remove the trigger. Remove the roll pins that secure the trigger valve and pull the trigger valve out of the housing. Insert the new valve into the housing, install the pins to hold it in place, and secure the stay pin with the washer.
Compatibility
This part is compatible with the following machines:
Porter Cable
RN175 Type 1 Roofing Nailer
RN175 Type 2 Roofing Nailer
RN175A Roofing Nailer
FN250A Finish Nailer
FC350 Type 1 Clipped Head Framing Nailer
FC350 Type 2 Clipped Head Framing Nailer
FC350 Type 3 Clipped Head Framing Nailer
COIL200 2" Coil Nailer
COIL250 Type 1 2.5" Coil Nailer
COIL250 Type 2 2.5" Coil Nailer
COIL350 Type 1 3.5" Coil Nailer
COIL350 Type 2 3.5" Coil Nailer
DA250A 15 Gauge Angle Nailer
DA250B 15 Gauge Angle Nailer
FCP350 Clipped Head Framing Nailer
FN250B 16 Gauge Finish Nailer
FR350 Type 1 Round Head Framing Nailer
FR350 Type 3 Round Head Framing Nailer
FR350A Round Head Framing Nailer
FR350MAG Type 1 Magnesium Round Head Framing Nailer
FR350MAG Type 2 Magnesium Round Head Framing Nailer
MS200 Type 1 16 Gauge Medium Crown Stapler
MS200 Type 2 16 Gauge Medium Crown Stapler
FR350 Type 2 Round Head Framer
FRP350 Type 1 3-1/2" Round Head Framer
FN251 (Type 1) Flooring Nailer
COIL200 (Type 1) 2in Coil Nailer Kit Power Tool
RN175A (Type 1) Coil Roofing Nailer Power Tool
DA250A (Type 1) 2 1/2in Angle Nailer Power Tool
DA250B (Type 1) Finish Nailer Power Tool
FN250A (Type 1) 2 1/2in Finish Nailer Power Tool
FN250B (Type 1) Finish Nailer Power Tool
FCP350 (Type 1) 3-1/2in Hp Ch Framer Power Tool
FM350A (Type 1) Framing Nailer Power Tool
FR350A (Type 1) 3-1/2in Rh Framer Power Tool
Products Compatibility
This item works with the following types of products:
• Nailer
• Stapler